全自動高速水墨印刷開槽模切機設備介紹：

1、整臺機器嚴格按照歐盟CE安全標準設計，具有規范化、通用化、人性化。依據人機一體化制造理念，能直接在觸摸屏上進行設定、修正、執行、更換、記憶等功能。

2、觸摸屏人機界面對話和電動控制雙系統操作功能，具有智能化歸零、記憶自動復位、存儲訂單等功能;可選配遠程跟蹤服務系統。

3、人機界面顯示器、PLC控制器、變頻器、伺服驅動器，均選用德國門子、德國博世力士樂、日本安川等世界知名品牌。

4、主傳動齒輪采用(20CrMnTi)合金鋼，經程控自動滲碳淬火、磨削加工處理后，保證齒面硬度均勻，達到六級標準精度其齒面硬度(HRC62-65)。

5、所有輥、軸類內孔均進行切加工，保證璧厚均勻、確保高速運轉時平穩可靠;在加工過程中，經過多次調質處理消除應力變化，通過磨削加工后表面進行鍍層保護。

6、整機壓力一鍵式調節，可自動讀取紙片厚度確認調節，也可輸入式調節。

7、伺服相位調節，最小可實現0.02毫米微調。

English introduction of the product：

1. The whole machine is strict in accordance with the EU CE safety standard dessign, with standardization, universality,humanization. According tothe man-machine integrated manufacturing concept,it can directly set,correct, execute, replace, memory and other functions on the touch screenwhich is a product with ultra-high cost performance.

2. Touch screen human-machine interface dialogue and electric control dual system operation function, with intelligent zero, memory automaticreset, storage orders and other functions; Remote tracking service system is optional.

3. Man-machine interface display, PLC controller, inverter, servo drive, are selected from Germany Siemens, Germany Bosch Rexroth,JapanYaskawa and other world famous brands.

4. The main transmission gear is made of high quality alloy steel( (20crMnTi), After program control automatic carburizing, quenching and grindingprocessing, the tooth surface hardness is guaranteed to be uniform and consistent, and the tooth surface harcness is HRC62-65 with six standardaccuracy. 

5. All roller and shaft holes are cut to ensure uniform wall thickness and stable and reliable operation at high speed; During the machining process,the stress changes are eliminated after severaltempering treatments,and the surface is protected by coating after grinding.

6. The pressure of the whole machine can be adiusted by one key, which can automatically read the thickness of the paper and confirm the adjustment, and also can be input adjustment.

7. Servo phase adjustment with a minimum fine tuning of 0.02 mm.